Certas Truck

Domestic Heating Oil Tank Cleaning for Optimal Performance

Regular maintenance is crucial to keep your heating system running smoothly and efficiently. One essential task that should never be overlooked is cleaning your heating oil tank. Neglecting this important maintenance step can lead to malfunctions, reduced system performance, and even potential damage.

In this guide, we’ll discuss:

Why Clean Your Domestic Oil Tank?

Over time, sediment, sludge, and impurities can accumulate in your oil tank. If left unaddressed, these contaminants can obstruct filters, clog fuel lines, and impact the overall performance of your heating system. Regular cleaning helps maintain optimal efficiency, reduces the risk of system breakdowns, and extends the lifespan of your equipment. This, in turn, helps you avoid costly repairs in future.

Discover the benefits of monitoring your heating oil tank.

When to Clean Your Domestic Oil Tank

The ideal time to clean your domestic oil tank is during the warmer months or before the heating season begins. That’s because the tank is likely to have a lower oil level which allows for easier access to the tank. Less fuel also reduces the risk of oil spills or leaks during the cleaning process.

It’s generally recommended to clean your fuel tank at least once a year. However, more frequent cleanings may be necessary if you observe reduced system performance or visible sediment accumulation.

Discover more ways to prepare your oil-heated home for winter.

Tips for Domestic Heating Oil Tank Cleaning

While the oil tank cleaning process may seem straightforward, it requires attention to detail and safety precautions. Some homeowners may choose to pay for oil tank cleaning services, but with proper guidance, you can tackle the job yourself.

Ensure Safety First

Before starting any maintenance task, it’s important to take necessary safety precautions. Make sure to turn off the power supply to your heating system and any associated appliances. You should also make sure there’s enough ventilation in the area and wear appropriate personal protective equipment (PPE) such as gloves and goggles.

Drain the Oil Storage Tank

The first step of the cleaning process is to drain the existing oil from the tank:

  1. Prepare a Safe Setup: Before draining the oil, ensure you have a safe setup. Place a plastic container specifically designed for holding oil underneath the outlet or drain valve of the tank. Ensure the container is sturdy, clean, and an appropriate size to hold the entire volume of oil.
  2. Open the Outlet or Drain Valve: Carefully open the outlet or drain valve, allowing the oil to flow into the plastic container below. Use caution to avoid any spills or leaks during this process.
  3. Empty the Tank Completely: Allow the oil to drain fully from the tank until no more oil is flowing. It’s important to ensure that all oil is removed to facilitate a thorough cleaning.
  4. Seal and Store the Container: Once the oil has been completely drained, securely seal the plastic container to prevent any spills or leaks. Label the container as “Used Oil” and store it in a safe, well-ventilated area away from ignition sources.

Clean the Your Tank’s Interior

After draining the oil from the tank, the next step involves cleaning the interior:

  1. Prepare a Separate Container: Use a separate container to collect the water used for cleaning. Ensure the container is clean and appropriate for holding the water.
  2. Position the Container and Hose: Place the container underneath the drain valve, similar to the oil drainage process. Attach a hose to a water source and position the other end inside the tank, ensuring it reaches all areas.
  3. Rinse the Interior: Turn on the water supply and use a hose to spray the inside of the tank thoroughly. The water should flow through the drain valve, carrying away any remaining residues or contaminants. Continue rinsing until the water runs clear and free from debris.
  4. Replace the Drain Valve Cap: Once the interior of the tank is adequately rinsed, close the drain valve by replacing the cap securely. Double-check that the cap is tightly sealed to prevent any leaks.

Clean the Tank Filter

Cleaning the filter is an important maintenance task to ensure the smooth flow of clean fuel into your system. Here’s how to clean a filter on an outside oil tank:

  1. Locate the filter: The filter is typically located near the oil tank, close to where the fuel enters the system. It may be housed in a protective casing or attached to the tank itself. Consult your tank’s manual or seek professional advice if you’re unsure about the filter’s exact location.
  2. Remove the Filter: Carefully remove the filter from its housing. Take note of how it’s installed, making a mental or written note of the orientation for proper reinstallation later.
  3. Inspect the Filter: Examine the filter for any signs of clogging or debris buildup. If the filter is disposable and not designed for cleaning, replace it with a new one. However, if it’s a cleanable filter, proceed with the cleaning process.
  4. Clean the Filter: Depending on the filter’s design and the instructions provided by the manufacturer, clean the filter using one of the following methods:
    1. Brush Method: Gently brush away any visible dirt, debris, or sediments from the filter using a soft brush. Take care not to damage the filter’s delicate components.
    2. Rinse Method: If allowed by the manufacturer, rinse the filter with a suitable cleaning solution. Submerge the filter in a bucket filled with the cleaning solution and gently agitate it to dislodge any stubborn contaminants. Be sure to follow the recommended soaking time, if specified.
  5. Rinse and Dry: Once you’ve finished cleaning the filter, rinse it thoroughly with clean water to remove any remaining cleaning solution or loosened debris. Ensure that the filter is completely dry before reinstalling it.
  6. Reinstall the Filter: Carefully place the clean and dry filter back into its housing. Make sure to align it correctly according to the notes or markings you made during removal. Ensure a secure fit and tighten any fasteners as required.

Ensure Proper Waste Disposal

After completing the cleaning process, you may have several containers filled with grime, contaminated oil, and sludge. As these containers will hold hazardous waste, you simply cannot leave them in your garage, even if they are sealed. Therefore, it’s crucial that you dispose of the waste properly.

Different regions may have specific guidelines or regulations regarding the disposal of hazardous waste. Consider reaching out to your local environmental agency or waste management department for any specific requirements you need to follow.

Alternatively, read our guide on appropriate heating oil disposal in the UK.

 

Sign up to our newsletter

*Required field